天然氣、沼氣、垃圾填埋氣和煤礦瓦斯是常見的能夠應用于燃?xì)鈨?nèi)燃機的氣體。除此之外，有一些工業領域內的廢氣含有可燃成分，例如氫氣和一氧化碳等，礦熱爐尾氣就是其中一種能進入燃?xì)鈨?nèi)燃機發電的工業廢氣。這種廢氣雖然雜質多、熱值低，但是經過凈化處理以后可以進入燃?xì)鈨?nèi)燃機發電，從而實現變廢為寶、節能減排，創造可觀的經濟效益。
Natural gas, biogas, landfill gas, and coal mine gas are common gases that can be applied to gas internal combustion engines. In addition, there are some industrial waste gases that contain combustible components, such as hydrogen and carbon monoxide. The tail gas of the submerged arc furnace is one of the industrial waste gases that can enter the gas internal combustion engine for power generation. Although this type of exhaust gas has many impurities and low calorific value, after purification treatment, it can enter the gas internal combustion engine for power generation, thereby realizing the transformation of waste into treasure, energy conservation and emission reduction, and creating considerable economic benefits.
礦熱爐又稱電弧電爐或電阻電爐。它主要用于還原冶煉礦石，碳質還原劑及溶劑等原料，主要生產硅鐵，錳鐵，鉻鐵、鎢鐵、硅錳合金等鐵合金。礦熱爐主要分為半密閉和密閉爐兩種類型，其中密閉爐產生的尾氣含有的可燃成分較多，能夠用于燃?xì)鈨?nèi)燃機發電。
Mineral arc furnace, also known as electric arc furnace or resistance furnace. It is mainly used for reducing smelting ores, carbon reducing agents, solvents and other raw materials, and mainly produces ferroalloys such as ferrosilicon, ferromanganese, ferrochromium, ferrotungsten, and silicomanganese alloys. Mineral heat furnaces are mainly divided into two types: semi enclosed and enclosed furnaces. The exhaust gas generated by enclosed furnaces contains more combustible components and can be used for gas internal combustion engine power generation.
Figure 1 Production and Utilization Process of Tail Gas from a Mine Heating Furnace
在礦熱爐生產鐵合金的過程中產生的尾氣(Furnace off gas，簡稱FOF)主要成分為CO，以及少量的 H2、 CO2等。其中一氧化碳(CO)氣體是由于還原劑中存在碳而形成的，如果還原劑中含有揮發性碳?xì)浠衔?，則會形成氫氣(H2)。過去，礦熱爐尾氣通常是直接燃燒后排放，而現在則可以通過高效的燃?xì)鈨?nèi)燃機發電，同時利用高溫?zé)煔獾臒崮?，使能源得到高效充分的利用?/div>
The exhaust gas (FOF) generated during the production of ferroalloys in a submerged arc furnace is mainly composed of CO, as well as a small amount of H2, CO2, etc. Carbon monoxide (CO) gas is formed due to the presence of carbon in the reducing agent. If the reducing agent contains volatile hydrocarbons, hydrogen gas (H2) will be formed. In the past, the exhaust gas from submerged arc furnaces was usually discharged after direct combustion. However, now it can be generated through efficient gas internal combustion engines, while utilizing the heat energy of high-temperature flue gas to efficiently and fully utilize energy.
的熱值通常只有天然氣熱值的1/3左右，也就是說相比于同級輸出功率的天然氣機型，F(xiàn)OF發電機組的進氣量需要增大3倍以上。FOF的抗爆性與天然氣也有顯著區別，其甲烷指數(Methane Number，簡稱MN)只有天然氣的大約60%左右，這意味著這種氣體在內燃機氣缸里面更容易發生爆震。所以，燃?xì)獍l(fā)電機組需要通過傳感器監測爆震的發生以調整機組的運行狀態。
The calorific value of FOF power generation units is usually only about one-third of that of natural gas, which means that compared to natural gas models with the same level of output power, the intake volume of FOF power generation units needs to be increased by more than three times. The anti knock performance of FOF is also significantly different from that of natural gas, with its Methane Number (MN) only about 60% of that of natural gas, which means that this gas is more prone to detonation in internal combustion engine cylinders. Therefore, gas generator units need to monitor the occurrence of detonation through sensors to adjust the operating status of the unit.
另一方面，F(xiàn)OF燃燒時的層流火焰速度(Laminar Flame Speed，簡稱LFS)卻比天然氣快許多，這和氣體里面氫氣的含量比例有關。層流火焰速度是在層流前沿發生氧化反應的速度， 即未燃燒的混合氣與火焰前沿之間的相對速度。根據麻省理工學院的研究資料，在當量比(Equivalence Ratio)為2時，5% H2和95% CO組成的混合氣的LFS約為50cm/s，而 50% H2和50% CO組成的混合氣的LFS可到160cm/s。鑒于FOF特殊的燃燒特性，燃?xì)鈨?nèi)燃機的進氣系統和控制參數都需要特殊設計以適應其特性，同時還必須滿足NOx的排放要求。
On the other hand, the laminar flame speed (LFS) during FOF combustion is much faster than natural gas, which is related to the proportion of hydrogen content in the gas. The laminar flame velocity is the rate at which oxidation reactions occur at the front of the laminar flow, that is, the relative velocity between the unburned mixture and the flame front. According to research data from the Massachusetts Institute of Technology, when the equivalence ratio is 2, the LFS of a mixture of 5% H2 and 95% CO is about 50cm/s, while the LFS of a mixture of 50% H2 and 50% CO can reach 160cm/s. Given the unique combustion characteristics of FOF, the intake system and control parameters of gas internal combustion engines require special design to adapt to their characteristics, while also meeting the NOx emission requirements.
顏巴赫的 DIA.NE XT4系統在氣體質量波動時自動調整設置，因此能夠適應復雜的運行情況。同時，顏巴赫的LEANOX稀薄燃燒控制技術能夠?qū)崟r(shí)控制氮氧化物NOx的排放，確保始終滿足嚴苛的環保要求，使機組排氣出口NOx達到250-500mg/Nm3(@5% O2)，并且無需SCR等復雜的尾氣后處理裝置。新的顏巴赫資產管理系統myPlant則能實時監測、控制和預測機組的運行狀態，并能提供前瞻性的維護保養建議。
Yanbach's advanced DIA. NE XT4 system automatically adjusts settings when gas quality fluctuates, thus being able to adapt to complex operating conditions. At the same time, Yanbach's LEANOX lean combustion control technology can control the emission of nitrogen oxide NOx in real-time, ensuring that strict environmental requirements are always met, so that the NOx at the exhaust outlet of the unit can reach 250-500mg/Nm3 (@ 5% O2), and there is no need for complex tail gas post-treatment devices such as SCR. The new Yanbach asset management system myPlant can monitor, control, and predict the operating status of the unit in real-time, and provide forward-looking maintenance recommendations.
燃?xì)鈨?nèi)燃機對氣體的雜質含量要求
Requirements for impurity content of gas in gas internal combustion engines
尾氣的成分和氣量與爐子的運行參數有關，并受到原料質量、爐子控制和運行狀態等因素的影響，所以通常會連續變化。采用氣柜來減少氣體熱值和壓力的波動，對于燃?xì)鈨?nèi)燃機發電非常重要。在爐子供氣中斷時，氣柜還可以起到緩沖的作用。
The composition and gas volume of exhaust gas are related to the operating parameters of the furnace, and are influenced by factors such as raw material quality, furnace control, and operating status, so they usually change continuously. The use of gas cabinets to reduce fluctuations in gas calorific value and pressure is very important for gas internal combustion engine power generation. When the gas supply to the furnace is interrupted, the gas holder can also serve as a buffer.
進入內燃機前的FOF需要進行預處理，以滿足氣體質量要求。通常需要去除粉塵，以及多余的水分，還有焦油、硫及其他有害雜質等。硫、氨等成分的含量要求與燃?xì)獾臒嶂迪嚓P(guān)，須根據實際熱值確定上限值。下表是顏巴赫燃?xì)鈨?nèi)燃機對氣體的一般質量要求。
The FOF before entering the internal combustion engine requires pre-treatment to meet the gas quality requirements. Usually, it is necessary to remove dust, excess water, tar, sulfur, and other harmful impurities. The content requirements of components such as sulfur and ammonia are related to the calorific value of the gas, and the upper limit value must be determined based on the actual calorific value. The following table shows the general quality requirements for gases in Yanbach gas internal combustion engines.
南非鈦鐵礦冶煉廠礦熱爐尾氣發電項目
South African Ilmenite Smelter Mine Furnace Tail Gas Power Generation Project
南非大的一家鈦鐵礦冶煉工廠于2012年采用了8臺顏巴赫J(rèn)620燃?xì)獍l(fā)電機組，每臺功率1,698 kW，總?cè)萘?3.6 MW。所發出的電力并入公司11 kV內網，用于滿足工廠部分電能需求。
A large titanium iron ore smelting plant in South Africa adopted 8 Yanbach J620 gas generator units in 2012, each with a power of 1698 kW and a total capacity of 13.6 MW. The electricity generated is integrated into the company's 11 kV internal network to meet some of the power needs of the factory.
工廠內有兩個封閉的直流電弧爐，產生尾氣主要成分為73% CO, 14.5% H2，以及少量CO2等。據測算，該項目平均每年大約可以減少84,432 噸二氧化碳排放，是聯合國清潔發展機制CDM注冊項目。
There are two enclosed DC arc furnaces in the factory, which produce tail gas mainly composed of 73% CO, 14.5% H2, and a small amount of CO2. According to calculations, the project can reduce carbon dioxide emissions by approximately 84432 tons per year on average, making it a registered CDM project under the United Nations Clean Development Mechanism.
挪威錳鐵合金礦熱爐尾氣發電項目
Norwegian manganese iron alloy submerged arc furnace tail gas power generation project
北歐大的錳鐵合金生產商采用了1臺顏巴赫J(rèn)620燃?xì)獍l(fā)電機組用于礦熱爐尾氣發電 ，輸出功率 1.5MW。尾氣的主要成分為65% CO, 5% H2, 8% CO2等，低位熱值(LHV)大約2.8 kWh/Nm3。項目于2020年調試完成并投入商業運行。
Nordic manganese iron alloy manufacturers have adopted one Yanbach J620 gas generator unit for generating tail gas from submerged arc furnaces, with an output power of 1.5MW. The main components of exhaust gas are 65% CO, 5% H2, 8% CO2, etc., with a low calorific value (LHV) of approximately 2.8 kWh/Nm3. The project was commissioned and completed in 2020 and put into commercial operation.
通過回收礦熱爐尾氣用于熱電聯供系統(CHP)，減少工廠對來自電網的電力需求，節省了電能成本，而系統產生的高溫?zé)煔鈩t用于冶煉前對礦石進行干燥。該工廠的目標是通過CHP的使用將工廠的能源效率提升40%。同時，該項目也因其在環境保護和節能減排方面的突出貢獻，獲得了挪威政府的大力支持。
By recycling the exhaust gas from the ore furnace for the combined heat and power supply system (CHP), the factory's demand for electricity from the power grid is reduced, saving electricity costs. The high-temperature flue gas generated by the system is used to dry the ore before smelting. The goal of the factory is to increase its energy efficiency by 40% through the use of CHP. At the same time, the project has also received strong support from the Norwegian government due to its outstanding contributions in environmental protection and energy conservation and emission reduction.
礦熱爐尾氣的發電應用充分利用了廢氣，將其轉化為電能和熱能，是冶煉行業節能減排和循環經濟的榜樣。通過對廢氣的利用變廢為寶，在改善環保排放的同時創造新的價值，節約了企業的運營成本。顏巴赫在該領域擁有豐富的經驗，其發電機組產品單機功率大，發電效率高，調試周期短，可靠性好，能夠有效幫助用戶獲得可觀的收益和顯著的碳減排效果。在我國“雙碳”戰略目標的大背景下，隨著對冶金行業環保要求的不斷提高，礦熱爐尾氣的高效利用將擁有廣闊的發展前景。
The power generation application of the tail gas of the submerged arc furnace fully utilizes the exhaust gas, converting it into electrical and thermal energy, and is an example of energy conservation, emission reduction, and circular economy in the smelting industry. By utilizing exhaust gas to turn waste into treasure, we can improve environmental emissions while creating new value and saving operating costs for enterprises. Yan Bach has rich experience in this field. His generator set products have high single unit power, high power generation efficiency, short debugging cycle, and good reliability, which can effectively help users achieve considerable profits and significant carbon reduction effects. Against the backdrop of China's "dual carbon" strategic goal, with the continuous improvement of environmental protection requirements for the metallurgical industry, the efficient utilization of tail gas from submerged arc furnaces will have broad development prospects.
The exciting content of this article is provided by the knowledge of alloy exhaust gas generator sets. There are also many exciting content on this website, and you can click to enter more content: http://m.shgcmy.com We have dedicated customer service to answer your questions
全國服務熱線:
濟南濟柴環能燃?xì)獍l(fā)電設備有限公司
